Jobo Lab Kit Large

Item: 39128
All the equipment needed to start processing up to four 35mm or 120 black & white film
Available
Item: 39128
All the equipment needed to start processing up to four 35mm or 120 black & white film
Available
If you're looking for all the equipment needed to start processing up to four 35 mm or 120 (roll film) black & white films, then the Job Lab Kit L is all you need. It includes the high-quality JoboTank 1540 and the only thing not included is chemistry and water.
You get two 1501 reels for use inside the tank, meaning that you can develop two 35 mm films simultaneously. When pulled-out to 6cm width, the 1501 reel holds two 120 films. The red clip prevents the films from overlapping. The cascade film washer allows for economical and efficient watering. Your black & white film reaches archival standard within just 5 minutes of washing.
The Jobo graduates included allow for precise measurement of any liquid and the two scaled bottles make for perfect storage of developer and fixer chemistry. The accurate thermometer makes sure you always are using the right temperature for your needs (usually 20 degrees) and convenient film clips make sure that your precious film hangs perfectly straight while drying.
This kit is for processing just four 36 exposure or 120 films at a time, but Jobo is a modular tank system so you can add capacity at any time in the future.
The Lab Kit would save 40% if you bought the constituent parts separately.
Contents include:
1 x Jobo 4-reel Tank 1540 (including 2 x 1501 reels)
(for up to 4x135/36 or 4x120 films)
2 x Scaled Jobo bottles (1000 ml)
1 x Jobo Graduates (260ml)
1 x Jobo Graduate (20ml)
2 x Sets of Jobo Film Clips
1 x Jobo B&W or Colour Thermometer
1 x Jobo Cascade Washer
1 x Jobo Roller Base #1509 for manual rotation processing
If you need chemicals, click the Simplicity link below, it has everything you need.
JOBO CPP-3 Processor for all kinds of silver halide films and prints.
The Analogue Photographer
differentiates himself from all digital work. There is no better way to create truly unique pictures, other than by hand-crafted art-work.
Also, schools and colleges who teach photography need reliable equipment to give their students hands-on experience of real photography.
The freelance photographer likes to be independent and relies on fast processing results.
The analogue photographer has the choice to fine-tune his processing and printing by using a combination of either film or print processing solutions.
The fine art photographer cares for
instant processing
repeatability in processing
economical usage of chemical solutions, even when sporadically in usage
a complete modular system
JOBO Processor CPP-3 #4083 semi-automates all film and print processing for daylight operation.
All available colour and B/W films on the market can be processed at home, using any chemistry.
Roll films 135, 120; Sheet films 4 x 5 or 8 x 10 inches; Prints up to 20x24? /50 x 60 cm.
Technology of Rotary Processing
Everything you need for consistent, repeatable results are very precisely controlled through
Automatic agitation (rotating in both directions forth and back)
Automatic temperature control
Freshness of chemical solution (one shot processing)
Processing time
This One-Shot Processing method renders highest consistency in processing. This technology was developed by JOBO and applied by thousands of professional and semiprofessional photographers around the world, because the processing results meet the requirements of the film and chemical manufacturers. In fact, JOBO Processors have been employed by film manufacturers in the USA, Germany and Asia for the control of their own film-emulsions.
A versatile processing system to do flexible, creative work with any available formula.
CPP-3 includes the following accessories:
6 solution bottles, scaled, 1000 ml
4 graduates, 260ml
1 adjustable roller bases
1 JOBO Film tank 2520
2 reels 2501