THIS ITEM IS UNAVAILABLE. YOU MAY BE INTERESTED IN ONE OF THESE ALTERNATIVES...
login to saveProduct Description
We recommend Nova Monochrome print processors to free-up valuable space in your darkroom while saving you money at the same time. They are like turning three trays on their ends but still taking up less overall space than just one dish. But the money saving comes in when you consider your developer will last 4-5 weeks (rather than 4-5 hours) due to the extremely small surface area available for oxidisation.With Monochrome processors, you also have the major advantage of no setting-up or clearing away. There is no user contact with the chemistry either - great for health and safety at college. Although not heated, all the chemicals stay in the processor. After the first print, all that is required is a rinse of the unique Nova clip and a quick shake to dislodge the water then the next print can be started. At the end of the session, replace the floating lids on top of the tanks, and leave until the next time.
They are the ultimate BW print processor for RC prints in the smaller darkroom - operating at ambient temperature.
3 slot configuration, ideal for all modern black and white processes (developer, stop, fixer)
There is a choice of two models:
10 x 8in. Dimensions L25 x W14 x H31cm, Capacity 900ml solutions per slot
16 x 12in.Dimensions L45 x W14 x H36cm, Capacity 1.8litres solution per slot
The benefits are that:
MIMINUM VOLUME OF CHEMISTRY - The V profile of the slots enables the minimum volume of solution to be used and yet maintain excellent print quality
MAXIMUM CHEMICAL LIFE - The narrow slot arrangement ensures there is minimal oxidisation or evaporation so chemicals will keep in the unit for weeks at a time -
USAGE BASED RELENISHMENT - Replenishment rate 10cc of working strength solution per 10x8 print i.e. 50cc per 5 prints, or equivalent print area
VIEWING OF PROGRESS - The magic of development is retained by the use of tried and tested Nova acrylic clear sided textured panels to form each slot
CONSISTENT AGITATION - Use of the Nova Clip when attached to the print ensures even and consistent agitiation - the textured processor walls prevents print adhesion
MAXIMUM PRODUCTIVITY - The Nova Clip ensures easy transfer between slots and ultimately the Nova Rapidwasher if employed - allowing high volumes of prints to be produced
The Monochrome makes your darkroom compact, efficient and always ready for work!
Customer Reviews
By Henry Artist on 9th September 2013
"After several decades of developing prints in trays I finally got round to buying a Nova Processor.
Having set it up in my darkroom it becomes apparent that it doesn't take up much. My first thought on using it was "Why didn't I buy one of these years ago?" No more mixing chemicals and washing trays after EVERY darkroom session. Oh the joy! I can do as many or as few prints as I like and not have to worry about "getting the most" out of my chemicals. The chemicals really do stay good for weeks on end and only occasionally need replenishing. It is important to make sure at the start of each session that the fluid levels are high enough so that when a print is put into each slot it is fully immersed.
I have found that it helps if you mix your developer and fixer at 1+4* rather than 1+9. Stop bath you can mix as normal.
It's easy to test your chemicals to see if they are still good or need replenishing. These tests can be done under normal light.
Developer: Take a sheet of photographic paper and tear or cut it into smaller strips. Dunk half the length of the strip into the developer and see how long it takes to go black. If it's two minutes or less then your developer is good. If it doesn't go completely black or takes a long time then the developer needs replenishing.
Stop Bath: Most stop bath chemicals have a colour indicator to show when they are exhausted. Use Mark 1 eyeball to see if colour has changed.
Fixer: Take a piece of exposed but undeveloped film and dunk half of it in the fixer. (The lead bit of 35mm films is great for this.) The dunked part should go clear in under two minutes if the fixer is still good.
In conclusion, a Nova Processor is a great addition to any darkroom. While not the cheapest of darkroom equipment it should last forever and pay for itself in savings made on chemicals. It's easy for novices to use and because of the thin slots that hold the chemicals the smell that some people find objectionable is greatly reduced.
*Your mileage may vary."
Manufacturer's information
The ultimate BW print processor for printing in any darkroom - operating at ambient / room temperature.
The Nova Monochrome is a simple and yet cost effective processing unit designed to sit in your darkroom ready to be used immediately. BW chemicals remain in the unit at all times ready to start printing without the need for setting up or clearing away after each printing session like traditional trays/dishes. The chemistry will even last for weeks or even months if replenished and by applying the special slot lids when you are finished. The base area of the unit takes up less space than a single tray/dish of the same size but effectively gives you three vertical trays - a great space saver in any darkroom.
Its 3 slot configuration is ideal for all modern black and white processes (developer, stop, fixer) and the amazing Nova Print Agitation Clip grips the exposed sheet of photo paper at the very edge and allows the user to create a print from 1 x 1 inch right upto the maximum size of the processor.
MODELS
ANMC1008 - 10 x 8 inch (25.4cm x 20.3cm) maximum print size
Unit dimensions (including drain taps) : L25 x W14 x H31cm
Slot capacity of around 900ml of each chemical
ANMC1612 - 16 x 12 inch (40.6cm x 30.5cm) maximum print size
Unit dimensions (including drain taps) : L45 x W14 x H36cm
Slot capacity of around 1800ml of each chemical
All processors are delivered complete with 3 - drain taps & pipes, 3 - tubular slot lids, 1 - Nova Print Agitation Clip and a full 12 month guarantee
BENEFITS
* VOLUME OF CHEMISTRY - The vertical profile of the slots means minimum volumes of solutions are used and yet maintaining excellent print quality
* MAXIMUM CHEMICAL LIFE - The narrow slot arrangement ensures there is minimal oxidisation or evaporation so chemicals will keep in the unit for weeks or even months at a time (if replenished)
* EVER READY FOR INSTANT USE - No messing about setting up or clearing away means you can produce more prints without wasted time
* CONSISTENT DEVELOPMENT - The use of the Nova Print Clip when attached to the print ensures even and consistent agitation and development - the textured processor walls prevent print adhesion and development of the image is right to the very edge of the paper.
* MAXIMUM PRODUCTIVITY - The Nova Clip ensures easy transfer between slots and ultimately to your Nova Print Washer - allowing high volumes of prints to be produced with the least cost possible.
The Nova Monochrome makes your darkroom compact, efficient and always ready for work - Start enjoying printing again!
Returns
All returns for purchased items are covered in our Customer Service section below under the sub-headings of Cancellation, Replacement and Terms and Conditions. Our returns policy is fully compliant with UK Online and Consumer Contracts Regulations (updated February 2020).Delivery
Most orders incur a total order delivery charge of £7.99 including VAT for mainland UK delivery. All goods are shipped by courier services. The companies we use are DPD or DHL and parcels are delivered in 48 hours or sooner from date of despatch. Exceptions to this, including lower delivery charges, can be found in the Information section for Delivery at the bottom this page.You may also like...
People who bought this also bought...
Recently viewed...
