FOTOLABORFotolabor SST4 Film & Print Processor
Semi-automatic film and processor - offer: free film tank *
JOBOJobo CPE-3 Film & Print Processor c/w lift, 4059
Motor driven processor with lift for 135, 120, up to 4x5 films in Jobo tanks.
JOBOJobo CPE-3 Film & Print Processor, 4063
Motor driven processor for 135, 120, up to 4x5 films in Jobo tanks.
JOBOJobo CPP-3 Film & Print Processor, 4083
Semi-automatic film and processor
JOBOJobo CPP-3 Starter Kit, 4084
Tank, reels, magnet and washer to get you started
JOBOJobo Lift for CPE-3, 4062
Simplifies processing with the CPE-3
JOBOJobo Lift for CPP-3, 4072
Simplifies processing with the CPP-3
JOBOJobo Print Processing Tank Roller Base, 1509
Helps roll Jobo film and print tanks in daylight
JOBOJobo Retro E6 Kit for CPE-3, 4061
Divider for your CPE-3 when using 6 bath E6 process
KAISERKaiser Dishwarmer 12 x 16in.
20 - 40 degrees C control, for 2x 8 x 10 or 1x 12 x 16
NOVANova FB Print Processor, 12 x 16in
For B & W fibre paper up to 12 x 16in.
NOVANova FB Print Processor, 16 x 20in
For B & W fibre paper up to 16 x 20in.
NOVANova Monochrome Print Processor, 12 x 16in.
3 slot 12 x 16in. processing, non-heated
NOVANova Monochrome Print Processor, 8 x 10in.
3 slot, 8 x 10in. processing, non-heated
NOVANova Print Agitation Clip
Used in all slot processors and washers as the holding device during processing and washing It is always a good idea to have a small supply of these at hand when producing batches of prints - especially when producing fibre based prints?with longer wash times?necessitating the use of several clips capacity.