Kaiser VCP 9005 Colour and Multigrade Enlarger inc.transformer & neg mask

Kaiser VCP 9005 Colour/MG Enlarger inc.transformer & neg mask
Kaiser VCP 9005 Colour/MG Enlarger inc.transformer & neg maskKaiser VCP 9005 Colour/MG Enlarger inc.transformer & neg mask

Item: 9023

Colour, up to 6.5 x 9cm, uses filter wheel, prints up to 16 x 20in.

0
Write the first review

Delivery: Up to 5 days

£1690.00

up down
Description

The Kaiser VCP 9005 is the "big brother" to the VCP 6005 in that it will handle film formats up to 6 x 9 cm (2.4 x 3.5 in.) and lenses up to 105 mm focal length.

After a review of its product range in 2017, Kaiser decided to no longer produce a separate multi-contrast enlarger in this configuration and they replaced it with one model that will do both colour and Multigrade work.

It comes with a removable compound negative carrier and interchangeable inserts, adjustable masking strips and grid pins and you get two inserts supplied: Anti-Newton glass on top, 6 x 6 format mask on the bottom. It will project onto the wall and floor, has a tiltable lens stage and offers distortion correction.

The filter wheel dials are indirectly illuminated and if using it for Multigrade work, we will find the appropriate filter settings for the required grades here. It also offers the best possible light distribution due to its special diffuser plate and is available as a black and white condenser version only.

This enlarger also includes oft forgotten little extras that add to its appeal. Fine focus control, colour filters up to 180 densitometric values, quick lens change, spirit level, floor/wall projection and baseboard choice are common features for all their range.

Our price includes a transformer and medium format negative mask which are worth over £100 if bought separately.

The VCP9005 really is an investment in your large-format darkroom printing future.

* For all film formats up to 6 x 9 cm and lenses up to 105 mm focal length.
* Removable compound negative carrier with interchangeable inserts, adjustable masking strips and grid pins.
* Inserts supplied: Anti-Newton glass on top, flat glass on the bottom.
* Wall and floor projection, tiltable lens stage, distortion correction on Scheimpflug principle.
* Colour head with dichroic interference filters, calibrated in densitometric values up to 180.
* Dials are indirectly illuminated..
* White-light lever for simultaneous swinging in and out of filters, with control light.
* Continuously adjustable density aperture up to 60 densitometric densities (= two aperture settings).
* Best possible light distribution due to special diffusor plate.
* Exchangeable double condenser system.
* UV and IR filter.
* Filter drawer.
* Built-in red filter
* Quick-change attachment for lenses.
* Height adjustment by hand-crank operated friction drive with weight compensation by roll-off spring mechanism.
* Manual fine focusing
* Filter holder for square filters can be swung out and height-adjusted, with diffusor screen for intergral metering.

Baseboard (WxDxH) 600 x 500 x 32mm (23.6 x 19.7 x 1.3 inches)

Supplied without lens but with unstabilised transformer and 35mm negative mask.

Returns
All returns for purchased items are covered in our Customer Service section below under the sub-headings of Cancellation, Replacement and Terms and Conditions. Our returns policy is fully compliant with UK Online and Consumer Contracts Regulations (updated October 2015).
Delivery
Most orders incur a total order delivery charge of £7.99 including VAT for mainland UK delivery. All goods are shipped by courier services. The companies we use are DPD or UK Mail and parcels are delivered in 48 hours or sooner from date of despatch. Exceptions to this, including lower delivery charges, can be found in the Information section for Delivery at the bottom this page.
Delivery Options
Home Delivery

UK mainland delivery from £7.99